The service life of LED lamps is related to the maintenance of lamps
1. How to use LED lamps
1. After buying the LED lights, carefully look at the marks and read the installation instructions, and install and use the LED lights according to the instructions, otherwise there may be danger;
2. Do not switch on and off frequently. When the LED lamp is frequently started, the current through the filament is greater than the current during normal operation, which will cause the temperature of the filament to rise sharply and accelerate sublimation, which will greatly reduce its service life.
3. When you find that the ends of the lamp tube are red, the lamp tube is black or has a shadow, and the lamp tube does not light up, you should replace the lamp tube in time to prevent unsafe phenomena such as ballast burnout;
4. Special attention should be paid to the fact that, except for special LED lamps, ordinary LED lamps should be avoided to be used in humid environments. Humid environments will affect the electronic components of the LED lamp drive power, making the electronic components damp and shortening the life of the lamps.
Second, the maintenance coup of led lights
1. It is best not to clean the led light with water, just wipe it with a dry rag dipped in water, if you accidentally touch the water, try to dry it as much as possible, and do not wipe it with a wet rag immediately after turning on the light.
2. Moisture-proof is the key to all lighting maintenance, especially LED lights in toilets and bathrooms and kitchen stove lights. The lights in these positions should be installed with moisture-proof lampshades to prevent moisture intrusion, rust damage or leakage short circuit.
3. Ordinary LED lights cannot be used in the circuits of dimming table lamps, delay switches, and induction switches.
4. Avoid using in high temperature and high humidity environment. LED lighting fixtures are generally used when the ambient temperature is 5-40°C.
5. Do not use polishing powder and other chemical agents on the metal parts of LED lamps. The dust behind the lamps should be cleaned with a dry cloth or duster.
6. The interior of the led lamp is mainly driven by a power supply. It is recommended that non-professionals do not assemble it by themselves to avoid dangers such as electric shock.
LED lights have the characteristics of environmental protection, high luminous efficiency, and long life. If used and maintained properly, it can greatly reduce the maintenance and repair costs in the later period, and there is no need to replace them within 3-5 years.
