At present, LED panel light is a relatively popular lighting fixture, which has the characteristics of ultra-thin energy saving and environmental protection, good color consistency, multiple optional color temperatures, high brightness, long life, low energy consumption, green environmental protection and other advantages; then LED panel light What is the installation method of ?
1. Fixed bracket
Drill a few screw holes on the ceiling, then install the LED panel light slide-in ceiling frame on the ceiling, fix the three sides, then slide the panel light into the fixed slide-in installation frame, and then put the second Fasten the frame with screws on all four sides.
Two, steel wire suspension
Fix the hanging wire installation piece on the ceiling, lock the screw (the hanging wire has been installed at the factory), the hanging wire is vertically down, and hang the component on the back of the LED panel light. Easy and trouble-free installation.
3. Embedded
Install the sheet metal groove on the ceiling, and then fix several outwardly protruding brackets on the back of the LED panel light, and then put the panel light in so that the bracket matches the sheet metal groove on the ceiling, and then it can be fixed on the ceiling. However, due to the different thicknesses of various ceilings, it is necessary to adjust the height between the lamp surface and the bracket, otherwise it will cause the LED panel lamp to be higher or lower than the ceiling surface after installation.
